QL-SD section

Picture of a SDHC card in a QL fitted with QL-SD

Last Updated: 21/10/14


This page is dedicated to the QL-SD add-on for the QL. The hardware was designed by Peter Graf and currently built and sold by Paul Veltjens through SellMyRetro.com. It consists of two small boards fitted to the QL, one of which replaces one of the original microdrive drives, since a microdrive slot is a suitable size for a SD-HC card socket. Note that only SD-HC cards can be used with QL-SD, not the older lower capacity SD cards. A second SDHC card socket can be added at the other microdrive slot. Keeping the SDHC card inside the QL case without removing a microdrive is also possible.

If anyone would like to make available any more software, documentation, or articles about QL-SD, please email it to me.

QL-SD manual - (850K) PDF file

QL-SD Starter Pack - (237K) the software supplied with QL-SD

BDI Specification - Specification of a simple and open interface for QL emulators, so native hardware drivers on the QL side can access block device images present on the emulator's host filesystem.
bdi_spec.txt - (3K) plain text file
BDI spec.pdf - (297K) PDF file version

QL-SD Driver Sources - (547K) released under GNU General Public License, these are the source files for the QL-SD drivers. Please read the PDF document supplied within the archive for guidance. [21/10/14]

QL-SD Hardware Sources - (69K) released under GNU General Public License.


Return to the home page. | Return to Downloads Index